Settings Via Circuit Board Controller; Adjusting The Water Temperature - Jaga BRIZA 22 Instructions D'installation

Masquer les pouces Voir aussi pour BRIZA 22:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

2. SETTINGS VIA CIRCUIT BOARD CONTROLLER
2.1. ADJUSTING THE WATER TEMPERATURE
2.1.1. Adjusting the maximum water temperature for cooling
By reducing the water temperature setting, the unit will start later. If the water temperature is set
higher, the unit will start sooner.
1. Start setup mode: press and hold the [-] button until the
2. Short press the [-] or [+] button to adjust the set temperature.
1
-
The blue LED flashes quickly
minimum temperature is reached.
Automatic control: The
set temperature.
3. Exit setup mode: hold the [-] button until the
2.1.2. Adjusting the minimum water temperature for heating
By increasing the water temperature setting, the unit will start later. If the water temperature is set
lower, the unit will start sooner.
In combination with a heat pump, it may be necessary to reduce the water temperature.
1. Start setup mode: Press and hold the [+] button until the
2. Short press the [-] or [+] button to adjust the set temperature.
1
-
The blue LED flashes quickly
mum temperature is reached.
Automatic control: The
temperature.
3. Exit setup mode: press and hold the [+] button until the
seconds.
After 30 seconds, the new settings are automatically saved and the device returns to the
selected mode..
JAGA NV | BRIZA 22 - JDPC.002 - US | MANUAL | 27200.20000096 | 11.02.2021 | V.02
6
-
+
53 ̊ F
57 ̊ F
61 ̊ F
10 sec
12 ̊ C
14 ̊ C
16 ̊ C
when the
green LED
lights up when the water temperature (supply water) is lower than the
-
+
75 ̊ F
79 ̊ F
82 ̊ F
10 sec
24 ̊ C
26 ̊ C
28 ̊ C
when the mini-
green LED
lights when the water temperature (supply water) exceeds the set
blue LED
64 ̊ F
68 ̊ F
71 ̊ F
75 ̊ F
18 ̊ C
20 ̊ C
22 ̊ C
24 ̊ C
The red LED flashes quickly
blue LED
flashes 5x and release or wait 30 seconds.
red LED
86 ̊ F
90 ̊ F
93 ̊ F
97 ̊ F
30 ̊ C
32 ̊ C
34 ̊ C
36 ̊ C
The red LED flashes quickly
red LED
flashes 5x and release or wait 30
flashes 5x and release.
1
79 ̊ F
26 ̊ C
when the maximum
temperature is reached.
flashes 5x and release.
1
100 ̊ F
38 ̊ C
when the maximum
temperature is reached.
-
+
-
-
+
-

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Jdpc.002

Table des Matières