Warnings And Safety; Packaging And The Environment; Protect The Environment - Jaga OXRE.015 Instructions D'installation

Masquer les pouces Voir aussi pour OXRE.015:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1. WARNINGS AND SAFETY
Installation:
–  the customer must engage qualified staff, all applicable construction and safety regulations must be
complied with during installation, commissioning, and maintenance of this product.
–  wear suitable and on-site prescribed personal protective equipment (PPE), such as work gloves,
safety glasses, etc.
–  always switch off and unplug the power supply before installation or maintenance!
–  use the Refresh Unit with care to prevent damage to the cover and the internal mechanical and electri-
cal components.
–  install devices only in places where there is no risk of exposure to rain.
–  devices may not be installed in spaces with acidic, alkaline, or organic vapours, paints or other gases,
corrosive gases, or gases with high concentrations of oily smoke.
–  mount the device on a sturdy and stable surface.
–  install this product in a location with a temperature between 5°C and 70 °C.
–  install this product in a location with a relative humidity less than 90%.
Use:
This device is not intended to be used by people (including children) with reduced physical, sensory,
or mental capacities, or who lack experience or knowledge, unless a person responsible for their
safety supervises them or has explained how the device must be operated.
Always supervise children to ensure that they do not play with the device.
Please read the user manual carefully.
Maintenance:
–  Always switch off and unplug the power before you install or maintain the device!
–  Maintaining the device is very important to ensure it works correctly. Maintenance must be
performed on a regular basis depending on the use and function of the room where the device is
installed.
–  Engage only qualified people to perform the maintenance work.
–  Use only original parts.
–  Cover: clean with a soft moist cloth. Do not use products based on solvents or cleaning agents.
Symbols:
Danger
Risk of electrical shock
2. PACKAGING AND THE ENVIRONMENT
Follow these instructions:
–  check for any visible damage.
–  open the packaging.
–  remove the packaging materials and dispose them at the proper collection points or recycling facilities
in accordance with the local regulations.

PROTECT THE ENVIRONMENT

Remove the packaging materials in accordance with the applicable national or local regulations.
DANGER
Keep the packaging out of the reach of children.
74

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Oxre.020Oxru.015Oxru.020

Table des Matières