Ordering Code; Options / Accessories - Jaga OXRE.015 Instructions D'installation

8. ORDERING CODE
Devicetype OXRE.015 / OXRE.020 / OXRU.015 / OXRU.020
Max. Flow 075 / 090 / 110 / 150 / 200*
OCU control C1 / C2 / C3 / C4 / C5
Country code BE / NL / ES / UK / D1* / D2*
CAUTION: Device parameters are country dependent.
For more information, see info sheet.
9. OPTIONS / ACCESSORIES
9.1. RF COUPLING (FOR BALANCING VENTILATION)
The use of the RFL-001 module on a Refresh Unit provides a wireless connection
with other devices that are also fitted with an RFL-001 module. The combination of
the C4 control (CO2MAN) and a Exhaustbox (OXEX.130) allows you to install a fully
demand-driven D system that runs perfectly in balance.
Orderingcode: RFL.001
[See manual RF link: 27200-23200085]
9.2. GREENWIRE SYSTEM
Jaga uses Q-bus for home automation.
[See manual Greenwire: 27200-23200086]
9.3. STAND ALONE CASING
If the Refresh Unit is not combined with a Low H2O radiator, it can instal-
led in an 'empty' Low H2O housing as used elsewhere in the home.
In addition to the standard Low H2O housing, it is also possible to opt for
a 'Stand Alone' housing with a STRADA look. The dimensions are aligned
with the OXRE.
XXX: colour
Std. colour: 133 (white)
For more colours, see the catalogue.
OXRE.015
OXRE.020
86
H L
42 60
42 80
OXRE.020/090/C2/NL
Country code
OCU Control
Max. Flow
Devicetype
*: project units only
*: Default country
D
12
17
L
D

ORDERING CODE

COXW.OXRE015/XXX
COXW.OXRE020/XXX