Hach LICO 620 Manuel D'utilisation page 100

Troubleshooting
Error displayed
An error occurred when uploading the instrument
data.
An error occurred when reading from the USB
memory stick.
An error occurred when writing to the USB memory
stick.
Please check on the current update file.
Please contact Customer Service.
Please check network configuration.
Please check the connection.
Please close the cover.
Please insert the USB memory stick.
Please check the connection and contact the
administrator.
File for instrument update missing.
File for instrument update is faulty.
It's recommended to execute a Full System Check
Entry invalid!
Absorbance > 3.5!
Color = ***
English 99
Definition
Error during update.
Error during update.
Network setup or FTP error
Error during update.
Error during update.
Check of the air values failed
Password incorrect
The measured absorbance exceeds 3.5
Color value outside measurement range.
Resolution
Restart the process or contact the manufacturer or
national agent.
Restart the process or contact the manufacturer or
national agent.
Restart the process or contact the manufacturer or
national agent.
Check the USB memory stick.
Contact the manufacturer or national agent.
Check the network setup. .
Check the network setup. .
Close the cuvette compartment cover.
Insert a USB memory stick into a USB A port on the
instrument.
Check the network setup or contact the manufacturer
or national agent.
Check the USB memory stick.
Save the update file again and repeat the procedure.
Switch the instrument off and then back on again. If the
system test is unsuccessful, contact the manufacturer
or national agent.
Forgotten your password?
Contact the manufacturer or national agent
Dilute sample and measure again
Dilute the sample or select appropriate color scale.