DeFelsko PosiTector DPM L Mode D'emploi page 7

Logged datasets download automatically from the probe when
connected to the PosiTector App or PosiTector Advanced
instrument. Datasets are stored into a Batch (group). Each time
a new Log is downloaded, all datasets are recorded and stored
into its own Batch (for example B1, B2, B3...).
To quit logging, select Stop Logging from the menu. Datasets in
the probe are not erased until a new Log is started or units are
changed. All stored datasets will remain in the PosiTector App
or PosiTector Advanced memory.
NOTE:
If the PosiTector DPM L is switched off or if battery
power is lost, Logging Mode will turn off. Logged measurements
will remain in PosiTector DPM L memory. It is recommended that
a fresh battery (CR2032X) be installed prior to long-term logging.
The currently active logging batch and previously downloaded
logged batches can be viewed in the PosiTector App or
instrument's memory.
PosiTector
To view the currently
active logging
simply connect to the
PosiTector DPM L probe
(pg. 5). The batch will
automatically display. The
displayed datasets will
update at each logging
interval.
Previously logged batches
can be viewed
selecting Open within the
Memory menu.
NOTE:
Additional datasets
cannot be stored into a
previously logged batch.
View Logged Datasets
Advanced
batch,
by
Batch
Dataset
Reading
number
6
PosiTector App