BH S1Ri Guide D'utilisation page 14

STEP 2
1) Remove the pre-installed Cover for Handlebar Post (R-2) and slide it up Post (B-1).
2) Connect the Heart Rate Cable (upper) (B-3) to the Heart Rate Cable (lower) (E-11)
3) Connect the Cable Wire (upper) (B-2) to the Cable Wire (lower) (E-17).
4) Tuck the excess cable lengths into frame tubing and slide the Handlebar Post (B-1) down on to the main
frame. Align the mounting holes and secure the post in place by using the previously installed 4 Screws (B-4)
and 4 Curved Washers (B-5)
14