Warranty Conditions - Toshiba QuietCo2OL Notice D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARRANTY CONDITIONS OF THE REFRIGERATION UNIT
No charge warranty period is 1 year from the date of installation of the refrigeration
unit. However, the coverage of the no-charge warranty is the failed component by
supplying a replacement component.
Any failure caused by the following reason is considered chargeable even during the
warranty period.
Failure caused by not conforming to the use condition specified in this
installation instructions
Model selection or equipment installation design was incorrect.
When our company has determined that the failure was generated by an error
in combining refrigeration unit models, incorrect control components such as
solenoid valve, or designing a refrigeration cycle without conforming to the
prohibited items, caution items, or instructed items indicated in the installation
instructions and on the product.
When a problem exists in the installation work.
When damage or breakage was generated by incorrect handling during
installation work.
When the failure is judged as being caused by contaminants (debris, metal
powder, etc.) entering in the cycle during the installation or piping work.
When the failure is judged as incorrect wiring work during installation and
piping work.
When the personnel related to our company pointed out incorrect work but no
improvement was made.
Incident caused by violating laws and regulations.
When the system was operated by knowing large vibration or operation sound.
When a problem was generated by a weak foundation or weak base frame.
When operational failure was caused in the check valve or solenoid valve due
to incorrect brazing of piping connection.
Incident was generated by locally modifying our company's product
specification, or moving the equipment.
Incident caused by contamination of debris in the electric components (hole
drilling for installing additional components).
Incident generated by not complying with the specified installation location,
operating ambient temperature or operating voltage.
Incident generated by locally modifying the company's product specification,
performing accompanying work or moving the location, or Incident generated
without using the protective devices included in the product.
Incident generated by incorrect operating environment or
maintenance/inspection.
35

Publicité

Table des Matières
loading

Table des Matières