Mounting Bicycles - LAS BC 260 Manuel De L'opérateur

Masquer les pouces Voir aussi pour BC 260:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARNING!
Personal injury or material damage due to loss of the bicycle carrier during the journey.
A loose connection between the bicycle carrier and caravan A-frame can lead to detachment of the bicycle carrier.
• Check the bicycle carrier for secure attachment.
• Replace damaged and / or defective parts.

MOUNTING BICYCLES

ATTENTION!
Personal injury or material damage possible due to loose parts.
Improperly tightened parts on the bicycles can become loose during the journey.
• Remove all parts not firmly attached to the bicycle, such as bicycle pumps, panniers, navigation devices or batteries.
NOTE
In order to improve the driving characteristics of your vehicle and caravan combination, mount the heavier bicycle first. If carrying
only one bicycle, this should be mounted in the rail closest to the front of the caravan.
NOTE
The wheel holders are adjustable to guarantee
the optimal stability of your bike. Try the first
time which position in your situation works best
(and is the most stable position).
To make sure that the carrier remains in its position, it must be
secured with the four screws. To do so, 4 small holes (3 mm) must be
drilled in the base part, after which the clamp and the base frame
can be screwed together.
23

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

11844

Table des Matières