Daily Use - Electrolux GA55SLI220 Notice D'utilisation

Masquer les pouces Voir aussi pour GA55SLI220:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DAILY USE

1. Open the water tap.
2. Press the on/off button to activate the
appliance.
• If the display shows the salt mes-
sage, fill the salt container.
• If the display shows the rinse aid
message, fill the rinse aid dispenser.
USING THE DETERGENT
A
SETTING AND STARTING A
PROGRAMME
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
3. Close the appliance door.
4. Set the programme and options
5. Press the OK touchpad, the pro-
gramme starts.
• The start of the programme does not
automatically occur if the salt con-
tainer and the rinse aid dispenser are
empty. The related messages show
in the display. Press the OK touch-
pad again.
Starting a programme with
delay start
1. Set the programme and the options.
2. Set the delay start.
3. Press the OK touchpad, the count-
down starts.
B
30
A
20
+
-
C
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for
the type of load and the degree of soil.
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compartment
(A) .
3.
If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appliance
door.
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
• The start of the countdown does not
automatically occur if the salt con-
tainer and the rinse aid dispenser are
empty. The related messages show
in the display. Press the OK touch-
pad again.
• When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start
while the countdown operates
1. Press the cancel touchpad.
2. The display shows how to operate to
cancel the delay start.
3. Press the OK touchpad, the set pro-
gramme starts.
Cancelling the programme
1. Press the cancel touchpad.
ENGLISH
75

Publicité

Table des Matières
loading

Table des Matières