Festool CTM 22 E SG Notice D'utilisation D'origine page 16

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Wet suction
- Functional safety not impaired; no action
necessary
6
After fi nishing work
- Switch off the cleaner and pull the Plug of
the mains lead out of the Plug socket.
- Wind up the mains lead (2.6).
- Empty dirt tank.
- Clean the vacuum cleaner inside and out-
side by suction and wiping.
- Deposit the appliance in a dry room, safe
from unauthorised use.
7
Maintenance and care
Always remove the power supply
plug from the socket before carrying
out any work on the machine.
All maintenance and repair work
which requires the motor casing to
be opened may only be carried out
by an authorised service centre.
A safety test is to be carried out at least
once a year by the manufacturer or an
instructed person, e.g. for possible dam-
age to the fi lter and leaks in the appliance,
and to ensure that the control devices are
functioning.
If the user services the appliance, it must be
dismantled, cleaned and serviced, as far as
possible without any danger to the mainte-
nance staff and other persons. Appropriate
measures include decontamination before
dismantling, locally fi ltered forced ventila-
tion on the dismantling site, cleaning the
service area, and suitable personal safety
equipment.
8
Accessories, fi lter
The accessory and fi lter order number can
be found in your Festool catalogue or on the
Internet under "www.festool.com".
9
Warranty
Our equipment is under warranty for at
least 12 months with regard to material or
production faults in accordance with na-
tional legislation. In the EU countries, the
warranty period is 24 months (an invoice
or delivery note is required as proof of
purchase). Damage resulting from, in par-
ticular, normal wear and tear, o-verloading,
improper handling, or caused by the user
or other damage caused by not following
the operating instructions, or any fault ac-
knowledged at the time of purchase, is not
covered by the warranty. Damage caused
by the use of non-original accessories and
consumable material (e.g. sanding pads)
is also excluded.
Complaints will only be acknowledged if
the equipment has not been dismantled
before being sent back to the suppliers or
to an authorised Festool customer support
workshop. Store the operating instructions,
safety notes, spare parts list and proof of
purchase in a safe place. In addition, the
manufacturer's current warranty conditions
apply.
Note
We reserve the right to make changes to
the technical data contained in this infor-
mation as a result of ongoing research and
development work.
16

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Ctm 33 e sgCtm 33 le sgCtm 44 eCtm 44 leCtm 55 e

Table des Matières