Belkin F5D7632-4 Manuel De L'utilisateur page 65

Troubleshooting
Problem:
Do Belkin products support WPA?
Solution:
Note: To use WPA security, all your clients must be upgraded to drivers and
software that support it. At the time of this FAQ publication, a security patch
download is available, for free, from Microsoft. This patch works only with the
Windows XP operating system.
Download the patch here:
http://www.microsoft.com/downloads/details.aspx?FamilyID=009d8425-ce2b-
47a4-abec-274845dc9e91&displaylang=en
You also need to download the latest driver for your Belkin 802.11g Wireless
Desktop Network Card or Notebook Network Card from the Belkin support site.
Other operating systems are not supported at this time. Microsoft's patch only
supports devices with WPA-enabled drivers such as Belkin 802.11g products.
Download the latest driver at http://www.belkin.com/uk/support/tech/index.asp
Problem:
I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a
Belkin Wireless Router or Belkin Access Point for a home network.
Solution:
1. From the "Security Mode" drop-down menu, select "WPA-PSK (no server)".
2. For "Encryption Technique", select "TKIP" or "AES". This setting will have to
be identical on the clients that you set up.
3. Enter your pre-shared key (PSK). This can be from eight to 63 characters
and can be letters, numbers, or symbols or spaces. This same key must be
used on all of the clients that you set up. For example, your PSK might be
something like: "Smith family network key".
4. Click "Apply Changes" to finish. You must now set all clients to match these
settings.
Problem:
I am having difficulty setting up Wi-Fi Protected Access (WPA) security on a
Belkin Wireless Router or Belkin Access Point for a business.
Solution:
If your network uses a radius server to distribute keys to the clients, use this
63 63
1
2
3
4
5
6
7
8
9
10
11