Belkin F5D7632-4 Manuel De L'utilisateur page 49

Manually Configuring your Router
4. You will be asked if you are sure you want to continue. Click "OK".
5. You will see one more message. This message tells you that the Router may not
respond for as long as one minute as the firmware is loaded into the Router
and the Router is rebooted. Click "OK".
A 60-second countdown will appear on the screen. When the countdown reaches
zero, the Router firmware update will be complete. The Router home page should
appear automatically. If not, type in the Router's address (default = 192.168.2.1) into
the navigation bar of your browser.
System Settings
The "System Settings" page is where you can enter a new administrator password,
set the time zone, enable remote management, and turn on and off the UPnP
function of the Router.
47 47
1
2
3
4
5
6
7
8
9
10
11