Belkin F5D7632-4 Manuel De L'utilisateur page 46

Manually Configuring your Router
1. Click the "Restore Defaults" button.
2. The following message will appear. Click
"OK" to restore factory defaults.
Saving/Backing up Current Settings
You can save your current configuration by
using this feature. Saving your configuration
will allow you to restore it later if your settings
are lost or changed. It is recommended
that you back up your current configuration
before performing a firmware update.
1. Click "Save". A window called "File
Download" will open. Click "Save".
2. A window will open that allows you to
select the location in which to save the
configuration file. Select a location.
There are no restrictions on the file
name; however, be sure to name the file
so you can locate it yourself later. When
you have selected the location and
entered the file name, click "Save".
3. When the save is complete, you will see
the window below. Click "Close". The
configuration is now saved.
44 44