Packing List - Ego Power+ ST1530E Manuel De L'opérateur

SPECIFICATIONS
Trimmer head 3-teeth blade
Voltage
56 V
Recommended Operat-
ing Temperature:
Recommended Storage
Temperature:
Optimum Charging
Temperature
5000/6000
No-load speed
min
-1
Cutting Line Type 2.4mm
Cutting blade /
Cutting Width 38 cm
Weight (Without battery
4.21Kg
pack)
Measured sound power 94.6 dB(A)
level L K=1.8 dB(A)
WA
Sound pressure level at 81.7 dB(A)
operator's ear L K=2.5 dB(A)
PA
Guaranteed sound
power level L
96 dB(A)
WA
(according to
2000/14/EC)
Front-assist 3.2 m/s
Handle K=1.5 m/s
Vibration
a
2.3 m/s
h
Rear Handle
K=1.5 m/s
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another.
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
DESCRIPTION
KNOW YOUR LINE TRIMMER (Fig. A1)
1. Threshold Ring
2. Trigger
3. Rear Handle
4. Air Inlet
5. Lock-Off Button
6. High/low-Speed Switch
7. Shoulder-Strap Mount Hanger
56 V 8. Adjustable Front-Assist Handle
9. Shoulder Strap
0°C-40°C
10. Multi-Function Wrench
11. Hex Wrench
-20°C-70°C
12. Trimmer Head (Bump Head)
13. Cutting Line
14. Release Tab
5°C-40°C
15. Line-Cutting Blade
5000/6000
16. Guard
min
-1
17. Ejection Mechanism
18. Electric Contacts
/
19. Latch
ABB1203
20. Rubber Pad Protection
30cm
21. Battery-Release Button
22. Safety barrier bar (For brush cutter head only)
4.45 kg
23. Locking pole for safety barrier bar (For brush
96.5 dB(A)
24. Out flange (For brush cutter head only)
K=1.88 dB(A)
25. Nut (For brush cutter head only)
76.5 dB(A)
26. Screws(For brush cutter head only)
K=3 dB(A)

PACKING LIST

98 dB(A)
PART NAME
Line Trimmer
2.8 m/s
2 2
K=1.6 m/s
2 2
Guard
2 3.1 m/s 2
Front-assist handle assembly
K=1.6 m/s
2 2
Hex wrench
Multi-function wrench
Shoulder strap
Operator's manual
Locking pole
Out flange
Nut
screw
ASSEMBLY
MOUNTING THE GUARD
1. Loosen and remove the two screws from the guard
56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1530E
cutter head only)
(Fig. B).
EN
QUANTITY
1
1
1
1
1
1
1
1
1
1
2
7