Maintenance; General Precautions; Daily Maintenance - FOM INDUSTRIE SIKA PLUS Manuel D'emploi Et D'entretien

10

MAINTENANCE

10.1 GENERAL PRECAUTIONS

Read the directions in this manual carefully before starting any action.
WARNING:
Only skilled personnel should be employed for any maintenance operation.
- All maintenance operations must be carried on when the machine is disconnected from mains and air network.
- Improper actions not in accordance with the safety directions given for the operation of this machine can cause
damages or injuries.
- When the maintenance process is completed, before putting the machine into service ensure that:
1 - Parts replaced and/or tools used for maintenance have been cleared away from the machine
2 - All safety devices are in working condition.

10.2 DAILY MAINTENANCE

The maintenance operations are very simple and are listed in the following order:
- Check the level of the lubricating oil for cutting through the inspection window "A" - Fig. 10-01.
- Check for any condensation in the cup through the slits "B" - Fig. 10-01. If there is condensation in the cup press
knob "C" - Fig. 10-01 upwards until it is discharged (this operation is performed without disconnecting the machine
from the air supply).
- If necessary using the compressed air gun supplied, clear any dust or shavings from the work contact surfaces.
CAUTION:
When using the compressed air gun, the wearing of protective goggles is obligatory.
- Keep the machine work area clean of any offcuts, shavings or any other machining residue.
- Carefully oil all the exposed mechanical parts (work table, etc.)
B
C
53
GB
SIKA PLUS
A
10-01