Adjusting The Blade Lubrication Flow - FOM INDUSTRIE SIKA PLUS Manuel D'emploi Et D'entretien

GB
SIKA PLUS
8.4 ADJUSTING THE BLADE LUBRICATION FLOW (Fig. 08-07)
The flow of lubricant for the blade is adjusted by the following procedure
Turning the knurled knob "A" clockwise decreases the flow, turning it counter clockwise increases the flow.
IMPORTANT:
In the oil tank for cutting (or blade) lubrication, put only:
OIL FOR CUTTING ALUMINIUM.
48
A
08-07