Technical Specifications - FOM INDUSTRIE SIKA PLUS Manuel D'emploi Et D'entretien

3.2

TECHNICAL SPECIFICATIONS

• Tungsten carbide saw blade: Ø 400 mm
• Three phase motor:
• Blade rotation speed: 2800 rpm
• Blade spindle: Ø 32 mm
• Motor-blade transmission by belt
• Blade protective guard
• Cuts with: head at 90°
head angled to 45° LH, to 45° RH and to positions in between
head angled to 45° LH and turned to 90°, to 45° Lh (and to positions in between)
• Head positioning to 90° and 45° LH/RH with conical pin and self-retaining release
• 2 pneumatic vices with safety servovalves
• Double working pressure servocontrolled in low pressure
• Working pressure: 7 bar
• Head down feed: hydraulic (adjustable down feed speed, rapid up feed) - SIKA PLUS code XZ-10567
manual- SIKA PLUS code XZ-10568
• Air consumption per work cycle: 1.3 Nl (XZ-10568) - 3 Nl (XZ-10567)
• Atomised cutting lubrication
• Set up for the installation of chips and fumes extraction system
• Set up for connection to roller table
Supplied as standard:
Compressed air gun
Optional:
Vertical LH/RH vice
Kit for microdrop pure oil cutting lubrication
Overall dimensions and weight (XZ-10567)
Kg. 170
2.2 Kw (3 HP) - 2800 rpm - 230/400V - 50 Hz
03-03A
Overall dimensions and weight (XZ-10568)
Kg. 170
35
GB
SIKA PLUS
03-03B