Fitting And Removing The Battery; Battery Level Indication; Attaching To Camera; Power Management - Hahnel MODUS 600RT Mode D'emploi

Fitting and Removing the Battery

Battery Level Indication

Make sure the battery pack is securely fitted in the flash.
Check the battery level indication on the LCD panel to see
the remaining battery level.
Low Battery Warning
Battery Level Meaning
Indication
3 bars Full
2 bars Middle
1 bar Low
No bars Lower battery, please recharge it
Blinking
The battery level is going to be
used out immediately.
Note: Please recharge the battery
as soon as possible (within 10
days). Then, the battery can be
used or stored as detailed in the
"How to store the battery" section.
16
1. To fit the battery,
push the battery
compartment cover
downward and open it.
2. According to the
triangle sign on the
battery pack, insert it
into the compartment
until a white clip locks
the battery with a click
sound.
3. To remove the battery,
tap the white clip and
the battery pack will
pop out. Then close the
compartment.
Modus 600RT

Attaching to Camera

Power Management

Use the ON/OFF Power Switch to power the flash unit
on or off. Switch off if it will not be used for an extended
period of time. Set as a master flash, it will turn the
power off automatically after a certain period (approx. 90
seconds) of idle use. Pressing the camera shutter halfway
or pressing any flash button will wake up the flash unit.
Set as a slave flash, it will enter sleep mode after a certain
period (adjustable, 60 minutes by default) of idle use.
Pressing any flash button will wake it up.
Disabling Auto Power Off function is recommended
when the flash is used off camera. (C.Fn-APO)
Slave Auto Power Off Timer is set to 60 minutes by
default. Another option "30 minutes" is available. (C.Fn-
Sv APOT, Page 42)
Modus 600RT
1. Attach the Speedlight
to the camera.
Slip the flash's
mounting foot into the
camera's hotshoe all
the way.
2. Secure the Speedlight
Rotate the lock ring on
the mounting foot until it
locks in position
3. Detach the Speedlight
Rotate the lock ring on
the mounting foot until it
is loosened. Then slide
the speedlight off the
camera hotshoe
17