Modus 600Rt Reset; Ttl Fully Automatic Wireless Flash Shooting - Hahnel MODUS 600RT Mode D'emploi

OK
Once all slave units are DCM matched, reboot all master and
slaves by turning OFF/ON
• Once all devices are DCM matched they will memorieze
the unique ID even it power is removed. Therfore you only
need to DCM your set once
• If you add more speedlights or Viper TTL units to your
range then you need to carry out the DCM matching for all
your units again
Modus 600 RT - Reset
TTL Fully Automatic Wireless
Flash Shooting
Basic Automatic Wireless Flash shooting
with a Single Slave Unit
28
4. A red LCD will show
"Slave OK". This slave
Modus 600 RT is now
DCM matched
5. DCM match the same
way, any additional slave
Modus 600RT while the
Master is still on
• To reset the Modus
600RT to factory default
settings press function
buttons 3 & 4 at the
same time and hold
until the LCD shows <
> release the
RESET
buttons
• When the Modus
600RT is reset the DCM
is also reset back to
open channel and the
previous DCM is lost
1. Master Unit Setting
• Attach a Modus 600RT
to the camera and set
it as the master unit
(Page 26)
• The Viper TTL
Transmitter can also be
used as a master unit
to control the wireless
slave Modus 600RT
(Page 38)
Modus 600RT Modus 600RT
2. Slave Unit setting
• Set the slave Modus
600RT to < >
SLAVE
setting (Page 26)
3. Position of camera
and speedlight
• Position the camera
with the master unit
attached and the Modus
slave within radio range
4. Set the Group flash
A
mode to <TTL>
• Check that group <
A
> is set to <TTL>. If
not press <
MODE
> button until <TTL> is
displayed
• Check that the slave
unit is set automatically
to <TTL> by the master
unit
5 Check Master/Slave
units are ready
• Check master
speedlight, ready
indicator is lighting and
that the slave flash
ready indicators are
blinking
6 Check the Master
slave speedlight
operation
• Press the master unit's
< > test button
• The slave speedlight
will flash. If it does not
fire, check the position
or distance of slave
from master
• You are now ready to
take a photo with the
wireless flash lighting
29