2. Other Protections
The system provides real-time protection to secure the
device and your safety. The following lists prompts for your
reference:
Prompts on
Meaning
LCD Panel
E1
A failure occurs on the recycling
system so that the flash cannot fire
Please restart the flash unit. If the
problem still exists, please send this
product to a maintenance center
E2
The system gets excessive heat.
Please allow a rest time of 10 minutes
The voltage on two outlets of the flash
E3
tube is too high. Please send this
product to a maintenance center
There are some errors occurred during
E9
the upgrading process. Please use the
correct firmware upgrade method
42
Technical Data
Modus 600RT
Modus 600RT
Modus 600RT
Fujifilm Cameras
TTL autoflash and manual flash
200Hz)
O1/O2
M/ A / B/ C
43