Viper Ttl Transmitter; Wireless Setting; Dcm (Digital Channel Matching); Viper Ttl Group Mode Setting - Hahnel MODUS 600RT Mode D'emploi

5

Viper TTL Transmitter

Wireless Settings

DCM (Digital Channel Matching)

1. DCM (Digital Channel Matching). Carry out the DCM
matching, see page 27
2. Set the Modus 600RT to 2.4GHz as Slave Unit - Group
A, see page 27
3. Press Viper <test> 08
Speedlight is triggered wirelessly

Viper TTL group Mode Setting

Press buttons A or B or
of each group to <TTL>, <M> manual & <blank> OFF.
Take a test photograph now and the Viper transmitter
will send a wireless signal to each Modus 600RT. The
Speedlight will then be set automatically to the same Viper
TTL selected group mode setting.
05
• The Viper LCD will show the setting of each group
• A group is turned OFF if the LCD is not showing the group
• A group is in Manual mode when <M> is displayed next
to the group
• A group is in TTL mode when <TTL> is displayed next to
the group
A , B or
• Each group
possible to use simultaneously different setting for each
A
group (e.g. Group may be in <M>, Group
C
and Group turned OFF)
Group Power Control setting for
Manual and TTL FEC
From the Viper TTL transmitter you can adjust the power
level and the FEC of each group.
4. Press <SEL> 02 select button and all three icons <A>,
<B> and <C> will flash.
5. Press one button A or
you want to adjust the power. Now only the selected
group icon <A or B or C> will flash
6. Use the adjust dial to set the power output in <
mode and FEC in TTL mode
7. Press the <SEL> button to lock your selection
36
Wireless Flash
Photography:
(2.4GHz) using
button to confirm that Modus
C to change the MODE setting
C
is set independently and it is
B
in <TTL>
B or C to select which group
M
Modus 600RT

Multi Mode

• Press and hold the < Group A > button to select
the Multi mode <
Group Buttons and adjust dial to set the number of
flashes, flash frenquency and power output. Press the
<SEL> button again to lock selection
• For more detail on operation of the viper TTL visit www.
hahnel.ie
>
Modus 600RT
> icon. Use the <SEL> button,
MT
37