Measurement Modes - % Or Mg/L; Sampling Modes - Continuous Or Manual; Saving, Viewing And Deleting Data - YSI EcoSense ODO200 Mode D'emploi

MEASUREMENT MODES - % OR MG/L

This unit provides three distinct measurements: Temperature and
Dissolved Oxygen in either % or mg/L.
The dissolved oxygen measurement unit is indicated on the right side
of the display. Press Mode to switch between % and mg/L.

SAMPLING MODES - CONTINUOUS OR MANUAL

The ODO200's sampling mode can be set to Manual or Continuous.
Press and hold the Sample/Mode key for 3 seconds to switch between
Continuous and Manual mode. When in Manual mode, press and
release Sample/Mode to initiate a new measurement.
Continuous mode: the instrument will continuously update the
dissolved oxygen measurement.
Manual mode: the instrument will update the DO reading until
reaching a stable measurement. The stable measurement will 'lock' on
the display until the user initiates a new measurement by pressing the
Sample/Mode key. Manual mode conserves battery power.

SAVING, VIEWING AND DELETING DATA

The ODO200 can save 50 data records. When in measurement mode,
press Enter to save a record. The instrument will confirm saving
the data by displaying SAVE and the data record number for one
second. "Full" is displayed when trying to save data and memory is full.
To view saved data, press Mode until Recall (rCL) is displayed and then
press Enter. Use the Up or Down arrow keys to review different saved
records. Press Mode to escape back to measurement mode.
To delete data records, press Mode while in measurement mode
until Delete (dEL) is displayed. Press Enter. "All" will be displayed and
blinking. Press the Up or Down arrow key to switch between delete 'All'
or 'Each' options. Select either 'All' or 'Each' by pressing Enter while
that option is displayed.
If 'All' is selected, all records will be deleted from memory and 'None'
will be displayed. Press Mode twice to return to the measurement
mode.
7