Actual Values; Control Unit Messages; Status Display - BONFIGLIOLI Vectron ACTIVE ACT 201 3,0 Guide De Démarrage Rapide

5

Actual values

The actual values in the VAL menu branch facilitate operation and error diagnosis.
R.m.s. Current
from the measurement in the three motor phases.
Display:
Output Voltage
ating point of the motor.
Display:
Active Power
Product of machine voltage, current and cosine phi
Display:
Actual Speed
the current load point.
Display:
Actual Frequency
quency of the drive calculated from the machine model.
Display:
Current Error
code are displayed. The current error is used for error diagnosis.
Display:
Warnings
The warning code can be read out via parameter 269.
Display:
Last Error
inverter will try to acknowledge some errors automatically, other errors will be reset via digital
input S1IND. The last error code is saved for error diagnosis.
Display:
6

Control Unit messages

green LED red LED
off
on
flashes
on
on flashes
flashes flashes
off flashes
off
06/07
06/07
211 - effective output current (motor current) of the frequency inverter calculated
0.0 A ... o⋅I
FIN
212 - output voltage of the frequency inverter modulated depending on the oper-
0.0 V ... U
FIN
213 - calculated power of the asynchronous motor at the current operating point.
0.0 kW ... P
FIN
240 - speed of the asynchronous machine calculated using the machine model and
-1
0.00 min ... 60000 min
241 - the current output frequency of the frequency inverter or actual fre-
0.00 Hz ... 999.99 Hz
259 - the cause which resulted in an error switch-off and the corresponding error
F0000 ... F9999
269 - if a critical condition is detected, this condition is indicated by the field WARN.
A0000 ... A9999
310 - the fault message is displayed immediately when a fault occurs. The frequency
F0000 ... F9999

Status display

Display
off
on
off RUN flashes
off RUN
RUN on + WARN flashes
RUN flashes + WARN flashes Ready for operation, current
FAULT flashes
on FAULT
-1
...
- No power supply
- Initialization and self-test
Ready for operation, no output signal
Operational message
Operational message, current
Last Error
Last Error
Description
Warning
Warning
310 of the frequency inverter
310, acknowledge error
269
269
33
33