Mechanical Installation - BONFIGLIOLI Vectron ACTIVE ACT 201 3,0 Guide De Démarrage Rapide

1

Mechanical Installation

Warning!
• During installation the following installation and safety instructions as well as the instructions in
the additional manuals on CD must be complied with.
During assembly, make sure that no forei g n particles (e. g . filin g s, dust, wires, screws, tools) can
•
get inside the frequency inverter.
• Mount the devices with sufficient clearance to other components so that the cooling air can
circulate freely. Avoid soiling by grease and air pollution by dust, aggressive gases, etc.
b
b1
x
a1
a a2
x
100 mm
x
b
b1
x
a1 a
a2
x
x 100 mm
20
20
ACT 201 (up to 3.0 kW) and ACT 401 (up to 4.0 KW)
c
b1
c1
ACT 201 (4.0 to 9.2 kW) and ACT 401 (5.5 to 15.0 kW)
c
c1
Insert the long side of the fixing plate
•
in the heat sink.
Screw the fixing plate to the mounting
•
plate.
top M4x20
bottom M4x60
• Screw the fixing brackets to the heat
sink of the frequency inverter and the
assembly panel.
06/07
06/07