Oscartielle MEGA HV BT 100 Mode D'emploi page 20

IG = Main switch
Cc = Connecting cable display – control board
Tr = Transformer
Ca = Supply cable
M = Compressor (Motor)
Lu = Lights
D = Defrost
Vm = Motor fan
Ve = Evaporator fan
Ra = Anti-mist heaters
The electrical diagram shown in Fig. 16 is related to MEGA HV BT/TN – FOX BT/TN island.
Legend:
COM = Electronic Command for BT/TN islands
D = Electronic Display
KE = Electronic Key
C1 = Compressor No.1
C2 = Compressor No.2
F1 = Evaporator Fan
R1 = Defrosting Resistance
R2 = Anti-condensing Resistance (Output No. 1)
R3 = Anti-condensing Resistance (Output No. 2)
I1 = BT/TN selector
S1 = Temperature probe
S2 = Defrost probe
The electrical diagram shown in Fig. 17 is related to MEGA HV BT – FOX BT island.
Legend:
COM = Electronic Command for islands
D= Electronic Display
C1= Compressor No.1
C2= Compressor No.2
F1= Evaporator Fan
R1= Defrosting Resistance
R2= Anti-mist Resistance (Output No. 1)
R3= Anti-mist Resistance (Output No. 2)
I1= BT/TN selector
S1 = Temperature probe
S2 = Defrost probe
18 - Conformity Declaration
A copy of the declaration of product conformity can be requested by filling in the form available a the internet address:
http://www.oscartielle.it/conformity
18