Taski AERO 3500uicro Manuel D'instructions page 9

Check emergency stop
Caution:
The emergency stop button is an important safety
element.
- Therefore, the function of the button must be checked
regularly in short time intervals, before using the ma-
chine.
• Switch the machine on.
• Press the driving switch while keeping the steering wheel
straight. The machine will start to move straight ahead.
• Now press the emergency stop.
Notice:
The machine must abruptly brake to a complete
stop and drive straight ahead without steering cor-
rection.
Danger:
If one of these functions is not working, the ma-
chine must be decommissioned until it can be pro-
fessionally repaired by an authorized TASKI
service partner.
Warning devices
Warning:
Warning devices such as warning light, flashing
light and signal tone when reversing must be regu-
larly checked for functioning. Malfunctions must be
resolved immediately.
Heightened caution and awareness is required to oper-
ate the machine if any of the warning devices are miss-
ing or defective.
- Covering the warning devices is forbidden.
Warning:
National regulations always take priority.
- These can require different rules of conduct and ab-
solutely must be adhered to.
Adjust sitting position
Notice:
The driver seat and steering wheel can be adjusted
as required in order to achieve a comfortable sitting
position.
Recommended sitting posture
8
Warning:
Pay attention to maintaining the correct sitting pos-
ture. Your legs must not laterally protrude from the
machine.
Lateral protruding of the legs may lead to severe inju-
ries in narrow passages or on fixed objects (e.g. rail-
ings, posts, etc.) in the cleaning environment.
Adjust driver seat
• The position of the driver seat can be
adjusted by lifting [1] and sliding [2] it.
1
2
Notice:
Make sure the driver's seat is correctly positioned
in the grooves provided
Adjust steering wheel
• Unlock the lever [1], adjust the steer-
ing wheel [2] to the desired position,
and lock the lever again.
2
1
Relocation drive
The driving direction can be controlled with the steering wheel and the
speed with the gas pedal. The speed is continuously regulated.
When the gas pedal is released, the machine decelerates until it stops
and the parking brake is activated.
Driving forward
• Switch on the machine (key switch).
• All indicator elements light up briefly.
The battery level indicator notifies
you that the machine is ready for op-
eration.
(in case of malfunction, see page
13).
• To drive forward, you only need to press the gas pedal.
Caution:
The speed is electronically reduced for driving
around corners.
Reversing
• When the reversing button is activat-
ed, the indicator below lights up and
an acoustic signal is emitted.