Kong ORTLES Instructions D'utilisation Et D'entretien page 17

Insert the rope in the ascender "A" again and close it (picture 37), take off the ascender "B"
and keep on recovering slowly. The knot will turn on the winch drum (picture 38); when it
comes close to the arm, further reduce the recovery speed until the knot passes through the
self-tailing. Now keep on recovering normally.
Pay great attention to the passing of the knot on the winch drum and through the self-tailing
keeping the two ends of the knot lifted outside the turns and guided by hand picture 39).
FIG. 37
KONG s.p.a. Zona Industriale -
TEL. + 39 0341 630506 • FAX. + 39 0341 641550 • EMAIL: kong@kong.it • WEB SITE: http://www.kong.it
FIG. 38
NOTE:
against the winch ascender!
This would prevent the opening and unlocking
(picture 40).
via XXV Aprile, 4 - 23804 MONTE MARENZO (LC) - ITALY
Never come with the jointing knot
FIG. 40
FIG. 39
14