Activating The Pedestrian Opening; Deactivating The Pedestrian Opening; Pedestrain Opening - SOMFY EXAVIA 500 Manuel

7.1 Activating the pedestrian opening

Button 1 on 2- or 4-button remote controls cannot be programmed to control pedestrian opening.
See "Programming the remote controls", page 15, for more information.
1
>2s
Press the button on the control
electronics for 2 seconds.
The indicator light comes on.
Move away from the control electronics when testing pedestrian opening.

7.2 Deactivating the pedestrian opening

Repeat the "Activate pedestrian opening" procedure using the button for which the pedestrian opening must be deactivated. The indicator
light comes on then goes out. The pedestrian opening is deactivated on this button.
2
Position the remote control on the control
electronics target.
EN - Replacing the EXAVIA 500 / WISPA 800 / SGS 201SGS 400 / SGS 501 electronic unit - SOMFY
PEDESTRIAN OPENING 7
3
Press button 2 on the remote control.
The "RADIO" and indicator lights come
on then go out.
Pedestrian opening is activated on this
button.
<0,5s
13