Electrical Installation; Safety Instructions Relating To Installation Of The Motorisation - SOMFY EXAVIA 500 Manuel

Safety instructions
This symbol indicates a danger, the different
degrees of which are described below.
Indicates a danger which may result in immediate
death or serious injury
Indicates a danger which may result in death or
serious injury
Indicates a danger which may result in minor or
moderate injury
Indicates a danger which may result in damage to or
destruction of the product
CAUTION - Important safety instructions
For reasons of personal safety, it is important to follow
all the instructions, as incorrect installation can lead to
serious injury. Retain these instructions.
The installer must train all users to ensure
the motorisation is used in complete safety, in
accordance with the operating guide.
Instructions must be given to the final user.
Important information
This product is a for a hinged gate on a residential property
as defined in standard EN 60335-2-103, with which it is
compliant. The main purpose of these instructions is to
satisfy the requirements of the aforementioned standards
and to ensure the safety of equipment and persons.
To ensure compliance with the standard EN 60335-2-103,
this product must be installed with a Somfy motor. The
assembly is together designated as a "motorisation".
The use of any accessory or any component not
recommended by Somfy is prohibited, on safety
grounds.
Somfy cannot be held liable for any damage resulting
from failure to follow the instructions in this manual.
If in any doubt when installing the motorisation or
to obtain additional information, consult the website
www.somfy.com.
The instructions may be modified if and when there is
a change in the standards or the motorisation.
Before installing the motorisation, check that the
temperature range marked on the motors is suited to
the location where the motorisation is to be installed.
Do not spray water onto the motorisation.
Do not install the motorisation in an explosive
environment.
4
EN - Replacing the EXAVIA 500 / WISPA 800 / SGS 201SGS 400 / SGS 501 electronic unit - SOMFY
DANGER
WARNING
PRECAUTION
CAUTION
WARNING
WARNING
CAUTION

Electrical installation

DANGER
The installation of the power supply must comply
with the standards in force in the country in which the
motorisation is installed, and must be carried out by
qualified personnel.
DANGER
The electric line must be exclusively reserved for
the motorisation and equipped with protection,
comprising:
• a 10 A fuse or breaker,
• a differential type device (30 mA).
An all-pole power supply cut-off device must be
provided. The switches provided to ensure a cut-out
of all poles on fixed appliances must be connected
to the power supply terminals and there must a
separation between the contacts on all poles to
ensure complete disconnection in conditions where
category III high impulse voltage is present.
Low-voltage cables subject to inclement weather
must be at least of type H07RN-F.
It is recommended that you fit a lightning conductor
(mandatory maximum residual voltage of 2 kV).
Safety instructions relating to
installation of the motorisation
WARNING
Take off any jewellery (bracelet, chain, etc.) during
installation.
For manoeuvring, drilling and welding operations,
wear appropriate protection (special glasses, gloves,
ear protection, etc.).
DANGER
Do not connect the motorisation to a power supply
(mains, battery or solar) until installation is complete.
WARNING
Modifying one of the elements provided in this kit
or using an additional element not recommended in
this manual is strictly prohibited.
Monitor the gate as it moves and keep people away
from it until installation is complete.
Do not use adhesive to secure the motorisation.