Using The Gliding Rack - Samsung NX58K7850S Série Manuel D'utilisation

Gas oven
Inserting and removing an oven rack
Rack and Pan Placement
Single Oven Rack
5
3
Multiple Oven Rack
28 English
To insert an oven rack
1. Place the rear end of the rack on a rack
guide.
Slide the rack into the rack guide while
2.
holding the front end of the rack.
To remove an oven rack
1. Pull out the rack until it stops.
2. Pull up the front end of the rack and
remove it from the rack guide.
Centering the baking pans in the oven as
much as possible will produce better results.
If baking with more than one pan, place the
pans so each has at least 1˝ to 1½˝ of air
space around it.
If baking on two racks in Single mode, place
the oven racks in positions 3 and 5 for the
best results.
When baking in Single mode on a single
oven rack, place the rack in position 3 or 4.
• When you use the Gliding Rack, place
the Gliding Rack below the flat rack.

Using the gliding rack

The fully extendable Gliding Rack makes food preparation easier, especially when
preparing heavier dishes. The Gliding Rack has 2 glide tracks that allow you to
extend the rack well out of the oven without touching the sides of the oven walls.
Installing the Gliding rack
NOTE
You can install the Gliding Rack in any rack position except the highest (level 7)
and lowest (level 1) rack positions in the oven.
Removing the Gliding rack
• With the Gliding Rack in the "Closed"
position and the oven off, carefully
insert the Gliding Rack between the
guides untill the rack reaches the back.
• When using the Gliding Rack in the
oven, be sure to pull on the handle
of the rack only to slide the gliding
portion of the rack in and out. If you
grasp the frame while using the rack,
you will pull the entire Gliding Rack out
towards you.
• With the Gliding Rack in the "Closed"
position and the oven off and cool,
grasp the rack and frame and pull both
towards you to remove.