Samsung NX58K7850S Série Manuel D'utilisation page 48

Troubleshooting
Problem Possible cause
The oven light The oven door lock is
(lamp) will not turned on.
turn on.
The Sabbath function
has been activated.
A loose or burned-out
bulb.
The switch operating the
oven light needs to be
replaced.
Oven smokes Meat or food was not
excessively properly prepared
during broiling. before broiling.
An improperly
positioned top oven rack.
The controls are not
being set properly.
Greasy buildup on oven
surfaces.
48 English
Action
The display will show the Lock
icon. Hold the oven door open
and press the START/SET pad for
3 seconds. The oven will beep and
the Lock icon will turn off.
SAb and the time of day will show
in the display. All other controls
and signals will be deactivated. To
cancel the Sabbath function and
reactivate the light switch and
other controls, press and hold the
Bake and Touch to Wake-Up pads
simultaneously for 3 seconds.
See page 44.
Call for a qualified service
technician.
Cut away excess fat and/or fatty
edges that may curl.
See broiling guide on page 25.
See page 24.
Regular cleaning is necessary
when broiling frequently.
Problem Possible cause
Cooking is the fan automatically
finished, but the runs for a certain
cooling fan is amount of time to
still running. ventilate inside the oven.
Oven will not The oven door lock is
self-clean. turned on.
The Smart Divider is
installed in the oven.
The oven is too hot.
The self-cleaning oven
controls are not properly
set.
Crackling or This is normal.
popping sound.
Action
This is not a product malfunction,
so there is no need to worry.
The display will show the Lock
icon. Hold the oven door open
and press the START/SET pad for
3 seconds. The oven will beep and
the Lock icon will turn off.
Self-clean will not operate with
the Smart Divider installed.
Remove it from the oven.
Let the oven cool down and reset
the controls. The self-clean cycle
will not lock the oven door if the
oven temperature is too hot. The
door must lock before the self-
clean cycle can start.
Reset the self-cleaning oven
controls. (See page 43.)
This is the sound of the metal
heating and cooling during any
cooking or cleaning function.