Technical Data - Niko 05-715 Mode D'emploi

05-715
- The select key cannot be controlled by means of a sharp object.
- If the foil on the front is damaged, you are strongly advized to
replace the dimmer.

7. TECHNICAL DATA

- Power supply: 230V ±10%, frequency 50Hz
- Installation: DIN rail (2U)
- Weight: ±144g
- Allowed ambient temperature: see load table
- Designed for use in an environment with a non-condensing
atmospheric humidity (30% - 70%)
- Own consumption: ±1W
- Input impedance
- Max. cover temperature (t c ): 90°C
- Max. wire diameter per connection terminal:
- power supply and load: 2 x 2,5mm
- input: 2 x 2,5mm
- Minimum load: 60W
- Maximum load: 750VA resistive, inductive and capacitive
(t°<35°C)
- Maximum voltage drop over dimmer: -5%
- Protections: - elektric, thermal protection (105°C) with automatic
- single thermal overload protection (135°C)
- Complies with the standards: EN60669-2-1 and EN55015
- Maximum distance to last push button: 100m
- Max. output voltage: supply voltage x 0.95 (dissipated power
= max. 1% of the absorbed power = max. 7W)
EN
0-10V: 33kΩ / 1-10V: 22kΩ
or 1 x 4mm
2
rebooth function (light is reduced to min. intensity). It the
temperature does not drop, the load is switched off.
or 1 x 4mm
2
2
2
67