Niko 05-715 Mode D'emploi page 63

05-715
B. Meaning LEDs
Load LED (fig. A)
This LED lights if the load is connected and indicates in which
mode the dimmer is set. reverse phase control or phase control
(the choice is made automatically).
In case of normal operation, the load LED can have the following
meaning:
LEDs
The LED lights continuously.
The LED blinks.
Error indication LED (fig. A)
In case of normal operation, this LED does not light. The LED
only lights if problems with dimming the load occur:
LEDs
The LED lights
continuously.
The LED blinks.
EN
Meaning
Current mode: reverse phase control
Current mode: phase control
Meaning
The dimmer operates with reverse phase control
and cannot dim the load due to an error (overload,
overtension,...)
The dimmer operates with phase control and
cannot dim the load due to an error (overload,
overtension,...)
63