Niko 05-715 Mode D'emploi page 61

05-715
This function and the last set light value are saved in a permanent
memory. They are not lost in case of a power failure. With memory
function, the dimmer first switches on at min. light intensity. Then,
the dimmer switches on at the last set light value.
With memory
Press briefly = switching on/off, 'on' at previous level
Press long = dimming up/dimming down
Press long when dimmer is "off" = dimmer dims up from min..
When dimming up: dimmer stops at max. value.
When dimming down: dimmer stops 2s at min. value and then
dims up.
A renewed (long) press reverses the dimming direction.
Without memory
Press briefly when dimmer is off = dimmer is always switched
on at max. value.
The other operations are identical to those 'with memory'.
Operation input 2 – Atmosphere button (terminals 1 and 2)
Input 2 enables you to save and retrieve an atmosphere. The
atmosphere is set to max. light intensity as a standard.
To save a light atmosphere, proceed as follows:
1. Set the desired light atmosphere with input 1.
2. Keep input 2 pressed for 3s. The connected load first dims to
the previous set light atmosphere and after 3s to the desired
light atmosphere and then saves this atmosphere.
3. The light atmosphere has been set.
The light atmosphere can be retrieved at any time by pressing
input 2.
EN 61