Installation And Connections - Niko 05-715 Mode D'emploi

05-715
Read the complete manual before carrying out the instal-
lation and activating the system. Keep the manual for
future reference.
1. DESCRIPTION
This 750VA universal dimmer is designed for DIN-rail mounting and
is 2U wide. This universal dimmer is suitable for dimming resistive,
inductive and capacitive loads. The total connected load can max.
amount to 750VA. The dimmer functions both as a phase control
dimmer and as a reversed phase control dimmer. The choice between
both dimming principles is automatically made. The dimmer can
be used with or without memory and is provided with an automatic
detection and indication of overload. The following 4 operating
modes are possible: 0-10V analog control; 1-10V analog control;
1 push button operation and 2 push button operation.

2. INSTALLATION AND CONNECTIONS

The dimmer is 2U wide and can be mounted in a DIN-rail enclosure.
The load (min. 60VA; max. 750VA) has to be connected to the
'load connection terminals' (see fig. 1), between terminal N and
terminal .
Connect the control to the 'control terminals' (fig. A). The following
4 operating modes are possible:
- analog 0-10V control, to be connected to terminals 1 and 3
- analog 1-10V control, to be connected to terminals 1 and 3
- 1-button control mode with push buttons, to be connected to
terminals 1 and 3 + possibility to connect atmosphere button
between terminals 1 and 2.
EN
(fig.A)
55