Niko 05-715 Mode D'emploi page 56

05-715
- 2-button mode with push buttons, to be connected to terminals
1, 2 and 3
The power supply is connected to the 'connection terminal power
supply 230V~', between terminals L and N. For the wiring diagrams,
see at the back of this manual.
➊ load terminals (N,
➋ terminals power supply 230V~ (L, N)
➌ load LED
➍ error indication LED
➎ input LEDs
➏ select button
➐ control terminals
(1 up to and incl. 3)
If everything has been connected correctly and the power is
switched on, the load LED and the error indication LED light
simultaneously for 1s. If no load is connected, both LEDs blink.
A connected load can manually be switched on and off by means
of the select button.
56
)
fig. A
➋ ➊
➌ ➍
➎
➏
➐
1 2 3
EN