Assembly / Disassembly - Hendi 224328 Mode D'emploi

ASSEMBLY / DISASSEMBLY

The assembly / disassembly operations of every de-
vice of the machine are performed with the machine
stop and with the plug disconnected from the socket,
or with the sectioning device in OFF.
TOOLS ASSEMBLY
HENDI 224328
Align and insert the coupling (5) of the mixer (3)
in the clutch (2) of the machine body (1)
Screw the mixer (3) up to fasten
it firmly to the machine body (1)
TOOLS ASSEMBLY
HENDI 224335, 224359, 224380
Align and insert the tools coupling (5) in the quick
clutch (2) of the motor body (1)
Turn the tools (3-4) up to fasten
them firmly to the machine body (1)
EN
The disassembly activities perform following in a backwards way the assembly phases previously
described.
It is forbidden the use of the whisk tool in the fixed speed machines (VF)
It is forbidden the whisk tool use in the machines with variable speed (VV) with the max speed function
WHISKS ASSEMBLY/DISASSEMBLY
For the disassembly pull the whisks (1) as soon as they don't part from a reducer group (2).
To assemble them insert the whisks basis (1) in the reducer group pivot (2) and push thoroughly.
10
The machine assembly goes on in different phases
(for example it is showed the machine with base
body).