Using The Position Selector; Using Balance Adjustment; Using The Time Alignment - Pioneer DEH-P9600MP Mode D'emploi

Section
08 Audio Adjustments
# You can select SW.2 and SW.3 only when sub-
woofer output is turned on in SW.1.
# When selecting the FM tuner as the source,
you cannot switch to SLA.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned.

Using the position selector

One way to assure a more natural sound is to
clearly position the stereo image, putting you
right in the center of the sound field. The posi-
tion selector function lets you automatically
adjust the speakers output levels and inserts
a delay time to match the number and posi-
tion of occupied seats.
1 Press AUDIO to select POSITION.
Press AUDIO until POSITION appears in the
display.
2 Press c/d/a/b to select a listening po-
sition.
Button Display
c Front Left
d Front Right
a Front Seat
b All Seat
# To cancel the selected listening position,
press the same button again.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
40
En
Position
Front seat left
Front seat right
Front seats
All seats
1 Press AUDIO to select FAD/BAL.
Press AUDIO until FAD/BAL appears in the
display.
2 Press a or b to adjust front/rear speak-
er balance.
Each press of a or b moves the front/rear
speaker balance towards the front or the rear.
FAD: F25  FAD: R25 is displayed as the front/
rear speaker balance moves from front to rear.
# FAD:FR00 is the proper setting when only two
speakers are used.
3 Press c or d to adjust left/right speaker
balance.
Each press of c or d moves the left/right
speaker balance towards the left or the right.
BAL: L25  BAL: R25 is displayed as the left/
right speaker balance moves from left to
right.

Using the time alignment

The time alignment lets you adjust the dis-
tance between each speaker and the listening
position.
1 Press AUDIO to select TA.1.
Press AUDIO until TA.1 appears in the dis-
play.
2 Press c or d to select the time align-
ment.
Each press of c or d selects time alignment
in the following order:
Initial (initial)Custom (custom)Auto TA
(auto-time alignment)TA OFF (off)
! Initial is the factory supplied time align-
ment.
! Custom is an adjusted time alignment that
you can create for yourself.
! Auto TA is the time alignment created by
auto TA and EQ. (Refer to Auto TA and EQ