Playing Tracks In A Random Order; Scanning Tracks Of A Cd; Pausing Cd Playback - Pioneer DEH-P9600MP Mode D'emploi

Built-in CD Player
1 Press FUNCTION to select Repeat mode.
Press FUNCTION until Repeat mode appears
in the display.
2 Press a to turn repeat play on.
The light comes on. The track currently playing
will play to the end and then repeat.
# To turn repeat play off, press b.
Note
If you perform track search or fast forward/re-
verse, repeat play is automatically cancelled.
Playing tracks in a random
order
Random play lets you play back tracks on the
CD in a random order.
1 Press FUNCTION to select
Random mode.
Press FUNCTION until Random mode ap-
pears in the display.
2 Press a to turn random play on.
The light comes on. Tracks will play in a ran-
dom order.
# To turn random play off, press b.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Press FUNCTION to select Scan mode.
Press FUNCTION until Scan mode appears in
the display.
2 Press a to turn scan play on.
The light comes on. The first 10 seconds of
each track is played.
3 When you find the desired track press
b to turn scan play off.
The light goes off. The track will continue to
play.
# If the display has automatically returned to
the playback display, select Scan mode again by
pressing FUNCTION.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.

Pausing CD playback

Pause lets you temporarily stop playback of
the CD.
1 Press FUNCTION to select Pause.
Press FUNCTION until Pause appears in the
display.
2 Press a to turn pause on.
The light comes on. Play of the current track
pauses.
# To turn pause off, press b.
Section
05
21
En