Multipurpose Red Led Above Output Level; Line Out Socket (7 Band) - TRACE ELLIOT AH1000-12 Guide D'utilisation

The actual power level produced from the amplifier will be dependent on the input signal and the
settings of the other controls.
Once set for a performance it can be left alone and the MUTE function can be used to turn the
signal off between songs or sets.
We also recommend turning the OUTPUT LEVEL control to '0' at the end of a session, before
switching off.
(22) Multi-purpose red LED above OUTPUT LEVEL
This LED has several functions. Firstly, it will flash on and off if the MUTE function is selected. It
will also light momentarily if maximum output from the power stage is reached.
It also functions as a general protection warning light, illuminating if any of the following
conditions occur: power amp over-temperature protection, short-circuit protection, over-current
protection. If this LED remains lit please refer to the HELP section at the back of this manual.

(23) LINE OUT socket (7 Band)

This is an unbalanced jack output that can be used to send the output of the preamp section to
another piece of equipment, such as a power amplifier, mixing desk or recording device.
The actual level is dependent on the setting on the OUTPUT LEVEL control, which means that if it
is used to expand the system with extra power amps and speakers, then the overall volume can still
be set by a single control.
15