Using Your Coffee Machine - Delta Q QOSY Mode D'emploi

Fig. 5: Install the water tank in the
machine.
Fig. 6: On/Off general button.

USING YOUR COFFEE MACHINE

Using your coffee machine for the first time
Confirm whether any accessories are missing and that the equipment is not
damaged.
Then clean the inner parts following the steps below:
• Remove all the protective materials and storage adhesives from the machine
components.
• Either lift the lid of the water tank, or remove it and open the cover and fill
with 0.75 L of water (see Fig. 4).
• Once the water tank has been filled replace it in the correct position
(see Fig. 5).
• Connect the electrical plug to the respective earthed socket.
• Switch the On/Off general button which is located at the back of the
equipment, to the ON position (see Fig. 6).
The buttons on the control panel will flash (orange), and pre-heating of the
equipment will start (around 90'').
• As soon as the control panel buttons stop flashing and alternate their
orange colour to green, this means that pre-heating has finished and the
equipment is ready for drink extraction (see Fig. 7 and see Fig. 8).
Fig. 7: Pre-heating of equipment.
QOSY
Fig. 8: Ready for use.
89