Siemens milltronics MCS BELT SCALE Manuel D'utilisation page 19

Wiring
load cell
' A '
Notes:
• Installation shall be performed only by qualified personnel in accordance with
local governing regulations.
• Use only approved conduit and conduit fittings or cable glands to maintain NEMA
or IP rating, as applicable.
• For hazardous area installations, use only approved junction boxes, metal conduit
and conduit fittings or cable glands. Adapter supplied for ½" NPT to M20x1.5.
Discard if using ½" NPT conduit fitting.
7ML19985HN63 Milltronics MCS Belt Scale – INSTRUCTION MANUAL
belt direction
load cell
' A '
load cell
'B'
stringer
mounted
junction box
(by customer)
load cell
'B'
Page 17