EdilKamin FANTASY Installation page 41

REMOTE CONTROL cod. 6
ey to buttons and display:
: ignition shutdown button
+
: button to increase the power operating temperature (when inside a menu, it increases the displayed variable)
-
: button to decrease the power operating temperature (when inside a menu, it decreases the displayed variable)
A
: button to switch to the "E S
M : button to toggle from automatic to manual mode and vice versa
TEMPERATURE ETECTE BY THE REMOTE CONTROL
he remote control is equipped with an internal sensor to detect the room temperature and display it in real time.
he detected temperature is transmitted periodically to the control board of the insert stove if the transmission LE of
the remote control and the receiving sensor of the synoptic panel of the insert stove are in each other s eld of view.
f the temperature of the remote control does not reach the control board of the insert stove for over
temperature detected by the sensor connected to the synoptic panel is used.
SELECTING THE OPERATING MO E
he following functions can be scrolled through and set by brie y pressing the "
automatic power adjustment
manual power adjustment
INSTRUCTIONS FOR USE
1
ER program
ndicates data transmission between the remote control and the
control board.
bloc ed eypad; avoid turning on the remote control
for no reason (press "
a few seconds to bloc unbloc the eypad)
at battery ( mini al aline batteries type
ndicates that ignition shutdown is being via the "E S
ER program
ndicates the room temperature detected by the remote control
(it indicates the values of the set parameters during its technical
set-up).
ndicates that a setting has been transmitted for
the stove to ignite
pellet air stove remote control setting indicator
automatic function
(the temperature value appears on the display)
manual adjustment function
(the operating power value appears on the display)
button:
- 41
-
and " simultaneously for
)
minutes, the