Nice MORX Mode D'emploi page 35

PROFESSIONAL mode programming functions:
All the programming functions must be activated with the MASTER
CARDS. If 2 different MASTER CARDS have been memorised, the
operation will only affect the group of CARDS associated with the
MASTER being used.
Table "F3" Insert CARDS valid only for output N°1 (STATIC 1) with MASTER 1
This function allows one or more CARDS valid only for output N° 1 to be inserted.
Repeat the operation at any time to insert other CARDS.
1. Pass the MASTER in front of the READER once
2. Pass the new CARD in front of the READER once
N.B.: The insertion procedure terminates after 10 seconds unless new CARDS are passed in front of the READER or if the MASTER CARD
is passed once again. Other CARDS can be inserted after the first, one after the other, repeating point 2 within a further 10 seconds.
Table "F4" Insert CARDS valid only for output N°2 (STATIC 2) with MASTER 2
This function allows one or more CARDS valid only for output N°2 to be inserted.
Repeat the operation at any time to insert other CARDS.
1. Pass MASTER 2 in front of the READER once
2. Pass the new CARD in front of the READER once
N.B.: The insertion procedure terminates after 10 seconds unless new CARDS are passed in front of the READER or if the MASTER CARD
is passed once again. Other CARDS can be inserted after the first, one after the other, repeating point 2 within a further 10 second
34
Example
Example