Terminal Block - Eaton CROUSE-HINDS Série Mode D'emploi

1.2

Terminal block

Order number:
If intrinsically safe circuits used, a sign is acc. EN/IEC 60079-11 applied to the terminal box.
Rated voltage:
Terminals
Test torques:
Terminals:
Mounting screws:
Weight:
1.3 Terminal block GHG 790
ATEX type examination certificate:
Marking acc. to 94/9/EG and standard:
IECEx type examination certificate:
Category of application:
If intrinsically safe circuits used. a sign is acc. EN/IEC 60079-11 applied to the terminal box.
Rated voltage:
Rated current:
Acc. to table on the inside of the enclosure cover!
Supply terminal: (max. number per terminals)
If different conductor cross sections are terminated at one connection point, the value of the smallest cross section is always applied to determine the maximum current load rating of the terminal.
Test torques:
Supply terminal:
Mounting screws:
Weight:
12
Explosion protected terminal boxes
GHG 710 1201 R 0001
to
Rated current:
1.5 mm² max.
1.5 mm² max.
1.5 mm² max.
2.5 mm² max.
2.5 mm² max.
2.5 mm² max.
1.4 Nm
M4 3.0 Nm
approx. 0.039 Kg
PTB 00 ATEX 3102 U
EN 60079-0
IECEx PTB 11.0029U
IEC60079-0 Ex e IIC
to
to 1.0 mm² 12.4 A
to 1.5 mm² 16.1 A
to 2.5 mm² 22.0 A
to 4.0 mm² 30.0 A
to 6.0 mm² 37.0 A
to 10.0 mm² 23.0 A
8 x 1.0 mm²
6 x 1.0 mm²
8 x 1.5 mm²
5 x 1.5 mm²
6 x 2.5 mm²
4 x 2.5 mm²
4 x 4.0 mm²
3 x 4.0 mm²
3 x 6.0 mm²
1 x 10 + 2 x 2.5 mm²
2.5
M4 3.0
approx. 0.05 Kg
solid
fine wire with ferrules
pin cable lugs
GHG 71
690 V AC/DC
6 A T +55 °C (T6)
amb
10 A T +55 °C (T6)
amb
16 A T +40 °C (T5)
amb
10 A T +55 °C (T6)
amb
16 A T +50 °C (T6) / T
amb
20 A T +40 °C (T5)
amb
II 2 G Ex e IIC
II 2 G
Ex e IIC Gb
690 V AC/DC
/
/
/
/
/
/
Nm
Nm
+55 °C (T5)
amb
Ex e IIC Gb
GB