Toner Coverage Report - Olivetti d-Copia 1600 Mode D'emploi

Alarm

Toner Coverage Report

OPERATION GUIDE
NOTE:
This can be set when the Auto Sleep setting has been set to On.
(Refer to Auto Sleep Setting on page 5-21.)
The time intervals that can be set are 1, 5, 15, 30, 45, 60, 90, 120, 180
and 240 minutes.
5 Press [OK]. The display will return to that of Step 2.
The Alarm can be set to sound when a key on the Operation Panel is
pressed or in cases when errors occur, etc.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press or to display 55.Alarm.
3 Press [OK].
4 Press or and select On in the case where the alarm is to be sounded
or Off when it isn't to be sounded.
5
Press [OK]. The display will return to that of Step 2.
Output the report that shows the number of copies made and the average
concentration of toner used for each paper size.
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display
56.CoverageRepo.
NOTE:
Check to make sure that Letter/A4 size paper is loaded in the
cassette.
3 Press [OK].
4 Press or and select Yes.
5
Press [OK]. The report will be output and the display will return to that of
Step 2.
System Setting
System Menu:
55.Alarm
System Menu:
56.CoverageRepo
5-23