Olivetti d-Copia 1600 Mode D'emploi page 96

System Setting
Selecting Auto Rotation
Silent Mode Transition Time
Auto Clear Setting
5-20
5 Press [OK]. The display will return to that of Step 2.
The auto rotation delivers the sets of copied documents perpendicular to
each other, allowing an easy separation of each set from the others.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press or to display 48.Auto
Rotation.
3 Press [OK].
4 Press or and select On when the sets of copied documents are to be
rotated and Off when no rotation is to be performed.
5
Press [OK]. The display will return to that of Step 2.
Shortens the amount of time the internal motor continues to run after the
copy is produced. Use this setting in cases when the motor noise is
bothersome.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display 49.Silent
mode.
3
Press [OK].
4 Press or and select the amount of time for transition into Silent Mode.
5 Press [OK]. The display will return to that of Step 2.
Set whether or not to automatically return the copier to Ready to copy.
state when copying is finished.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
System Menu:
48.Auto Rotation
System Menu:
49.Silent mode
OPERATION GUIDE