Olivetti d-Copia 1600 Mode D'emploi page 98

System Setting
Low Power Mode Transition Time
Sleep Mode Transition Time
5-22
4 Press or and select a time interval from 10 to 270 (seconds).
NOTE:
Set the time interval to a longer length of time in the case where
the copier is used often and to a shorter time interval when it is used
infrequently.
This can be set when the Auto Clear setting has been set to On. (Refer to
Auto Clear Setting on page 5-20.)
5
Press [OK]. The display will return to that of Step 2.
Set the time interval from the time operations end to the automatic
engagement of the Low Power Mode.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display 53.LowPower
Time.
3
Press [OK].
4
Press or and select a time interval from 1 minute to 240 minutes.
NOTE:
The time intervals available are: 1, 5, 15, 30, 45, 60, 90, 120,
180 and 240 minutes.
5 Press [OK]. The display will return to that of Step 2.
Set the time interval for automatically entering Sleep Mode when copying
is completed or after operations have been finished.
1
Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2 Press or to display
54.AutoSleepTime.
3 Press [OK].
4 Press or and select a time interval from 1 minutes to 240 minutes.
System Menu:
53.LowPower Time
System Menu:
54.AutoSleepTime
OPERATION GUIDE