Olivetti d-Copia 1600 Mode D'emploi page 97

Auto Sleep Setting
Auto Clear Time
OPERATION GUIDE
2 Press or to display 50.Auto Clear.
3 Press [OK].
4 Press or and select On in the case where the transition to Auto Clear
is to be made or Off when it is not.
5
Press [OK]. The display will return to that of Step 2.
Set whether or not to automatically enter Sleep Mode when copying is
completed or after operations have been finished.
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display 51.Auto Sleep.
3
Press [OK].
4
Press or and select On in the case when the transition to Auto Sleep
is to be made or Off when it is not.
5 Press [OK]. The display will return to that of Step 2.
NOTE:
If the Auto Sleep function interferes with your copy operations,
disable the function. Before disabling the Auto Sleep function, you may
want to try lengthening the amount of time before the Auto Sleep function
engages.
Set the time interval to automatically return the copier to Ready to copy.
state when copying is finished.
1 Display the System Menu. (Refer to System Menu Operations
Procedures on page 5-7.)
2
Press or to display
52.AutoClearTime.
3
Press [OK].
System Setting
System Menu:
50.Auto Clear
System Menu:
51.Auto Sleep
System Menu:
52.AutoClearTime
5-21