Olivetti d-Copia 1600 Mode D'emploi page 61

OPERATION GUIDE
1 Set the original.
2
Press [Split], select the type of original, and select
light up the corresponding display.
3 Press [Start]. The copier will begin copying.
In the case where Collate Copies has been set, proceed to Step 4.
4 Replace the original with the next one and press [Start]. The copier will
scan the original.
5
If there are no more originals to be scanned, press [OK]. The copier will
begin copying.
Copying Functions
or to
4-7